Epson 1410Wi - Using the Projector Help Displays

Power light Lamp light Temperature Status and solution
light
Varies Flashing Flashing orange An obstacle has been detected around the
orange projection window. Remove the obstacle, or clean
the obstacle sensors. If the problem persists,
unplug the projector and contact Epson for help.
Red Flashing red Flashing red Internal projector error. Turn the projector off,
unplug it, and contact Epson for help.
Note: If the lights display a pattern not listed in the table above, turn the projector off, unplug it, and
contact Epson for help.
Parent topic: Solving Problems
Related references
Projector Feature Settings - Settings Menu
Projector Setup Settings - Extended Menu
Where to Get Help
Related tasks
Replacing the Air Filter
Replacing the Lamp
Cleaning the Air Filter and Vents
Using the Projector Help Displays
You can display information to help you solve common problems using the projector's Help system.
1. Turn on the projector.
2. Press the Help button on the projector or the remote control.
You see the Help menu.
3. Use the up and down arrow buttons to highlight the problem you want to solve.
Note: You can also display image adjustment recommendations by pressing the left arrow button.
4. Press Enter to view the solutions.
219