Epson 1410Wi - Connecting a Printer to the Control Pad

2. Connect the USB cable to the projector's USB-A document camera port.
3. Connect the other end of the cable to the document camera's USB Type B port.
Parent topic: Connecting to External USB Devices
Related references
Optional Equipment and Replacement Parts
Connecting a Printer to the Control Pad
You can connect a printer or all-in-one device to the Printer port on the control pad and use it to print
your projected and annotated content.
Note: Make sure the printer meets the control command requirements.
1. Make sure a USB cable is connected between the USB-A port on the projector and the USB-B port
on the control pad.
2. Connect another USB cable to the Printer port on the control pad. Make sure the cable is no longer
than 16.4 ft (5 m).
50