Epson ActionPrinter 2000 - Dip Switch Settings

Setting the DIP Switches
DIP switch settings
The tables below show the settings for each DIP switch function.
The current settings appear on your self test printout.
See Table 1
characters and
See Table 2
DIP Switch 2
ON OFF
2-1 Short tear-off Invalid
Valid
2-2
Cut-sheet feeder mode
ON OFF
2-3
Skip-over-perforation
ON OFF
2-4
Auto line feed
ON OFF
Table 1 Page length
Page length SW1-3
SW1-4
11 inches
OFF OFF
12 inches ON
OFF
8.5 inches OFF
ON
11.7 inches
ON ON
3-6
Using the Printer