Selecting an International Character Set
International character sets provide you with some characters and
symbols used in other languages. The table below shows the eight
international character sets you can select with DIP switches 1-6,
1-7, and 1-8 when DIP switch 1-5 is turned off. The table also
shows the characters that differ in each set.
Note: If you wish to select an international character set when
DIP switch
1-5 is turned on, use the ESC R command.
Besides the eight sets above, the five international character sets
shown below are also available through the ESC R command.
Using the Printer
3-11
To Next Page
Loading...
