❏ Always close the printer’s covers gently. Never subject the printer to vibration.
❏ Do not cover the printer immediately after using it. Turn it off and wait until it cools down.
❏ Do not leave the printer’s covers open for any length of time, especially in well-lit places; light may
damage the photoconductor unit.
❏ Do not open the printer during printing.
❏ Do not tap media stacks on the printer.
❏ Do not lubricate or disassemble the printer.
❏ Do not tilt the printer.
❏ Do not touch the electrical contacts, gears, or laser devices. Doing so may damage the printer and
cause the print quality to deteriorate.
❏ Keep media in the output tray at a minimum level. If the media is stocked too high, your printer
may experience media misfeeds and excessive media curl.
❏ Keep the printer level to avoid toner spillage.
❏ When lifting the printer, grasp the areas shown in the figure.
❏ If you get toner on your skin, wash it off with cool water and a mild soap.
AcuLaser C1600 User’s Guide
Maintenance 52
To Next Page
Loading...
