Note:
❏ Do not touch the PC drum on the photoconductor unit.
❏ Position the removed photoconductor unit horizontally as shown in the illustration below.
Be sure to keep the photoconductor unit horizontal and place it where it will not become dirty.
Do not leave the photoconductor unit removed for more than 15 minutes, and do not place the
removed photoconductor unit in a location where it would be exposed to direct light (such as
sunlight).
3. Clean the media feed rollers by wiping them with a soft, dry cloth.
AcuLaser C1600 User’s Guide
Maintenance 55
To Next Page
Loading...
