Epson Aculaser C1600 - Page 71

Ready
indicator
(green)
Error
indicator
(orange)
Toner
indicator
(orange)
Display of
Remote
Panel
Program
Condition Action
Off On On NOT
INSTALLED
TONER /
CHECK X
(YMCK)
TONER
The toner cartridge is
not installed.
Install the all toner
cartridges.
TONER LIFE
END
Toner empty Replace the toner
cartridge.
Off On Blinking WRONG
TONER X
(YMCK)
An unapproved toner
cartridge is installed.
Install a correct toner
cartridge.
Off On Rapid
blinking
NON
GENUINE
TONER X
(YMCK)
The installed toner
cartridge is of an
unapproved type.
Install a Epson toner
cartridge of the
appropriate type.
See “About Toner
Cartridges” on page 38.
Press the Clear key to
clear the indicator
message.
Slow
blinking
Slow
blinking
*CHECK TRAY
PAPER /
LOAD
PAPER (XX)
Media empty Load media into Tray 1.
Slow blinking alternately * PAPER SIZE
ERROR /
RESET
PAPER (XX)
Media size error
The size of paper being
printed on is different
from the size of paper
specified in the printer
driver.
Press the Clear key to
cancel the error.
To print on paper of the
size specified in the
printer driver, load
paper of the correct size
into Tray 1, and then try
performing the print job
again.
Off Slow
blinking
*MEMORY
FULL
Memory full Press the Clear key.
If the error is not
corrected, turn off the
printer. After a few
seconds, turn on the
printer.
AcuLaser C1600 User’s Guide
Troubleshooting 71