Epson Aculaser C1700 Series - Page 15

2. (Energy Saver) Indicator
❏ Indicates that the printer is in the Power Saver Mode.
3.
(Jam) Indicator
❏ Indicates that a paper jam occurred.
4.
(Cancel Job) Button
❏ Press this button to cancel a job or clear an error.
5.
(Start) Button/Indicator
❏ Press this button to start 2 sided printing after loading paper.
❏ Press and hold this button to print the report pages.
6.
(Error) Indicator
❏ Indicates that an error occurred.
7.
(Load Paper) Indicator
❏ Indicates that no paper is loaded or the wrong size of paper is loaded.
8.
(Ready/Data) Indicator
❏ Indicates the printer status, such as receiving and printing data.
The indicators provide information on the status of the printer and help you locate each problem.
Indicator Status Condition
Toner Orange on The specified toner is low or not installed when genuine toner
cartridges are used (Non Genuine Toner is set to off at the Printer
Setting Utility).
All toner indicators light up when the printer is in the non-genuine
toner mode (Non Genuine Toner is set to On at the Printer Setting
Utility).
Orange blinks The specified toner cartridge is empty or invalid when genuine toner
cartridges are used (Non Genuine Toner is set to off at the Printer
Setting Utility).
Epson AcuLaser C1700 Series User’s Guide
Basic Operation 15