Epson Aculaser C1700 Series - Exiting the Power Saver Mode

The Printer Setting Utility appears.
2. Click the Printer Maintenance tab.
3. Select System Settings from the list at the left side of the page.
The System Settings page is displayed.
4. Specify the time for Mode 1 and Mode 2 for Power Saver Mode.
5. Click the Apply New Settings button to take effect.
Exiting the Power Saver Mode
The printer automatically exits the Power Saver Mode when it receives a print job from a computer. To
manually exit the Power Saver Mode, press any button on the operator panel.
Note:
Opening and closing the rear door will cause the printer to exit the Mode 1.
Epson AcuLaser C1700 Series User’s Guide
Basic Operation 18