Epson Artisan 810 - Right Housing; Card Cover

Epson Artisan 810/835/837/710/725/730/Epson Stylus Photo PX810FW/TX810FW/PX820FWD/TX820FWD/PX830FWD/PX710W/TX710W/PX720WD/TX720WD/PX730WD/TX730WD Revision G
DISASSEMBLY/ASSEMBLY Disassembly Procedures 121
Confidential
4.2.3.11 Right Housing / Card Cover
 Parts/Components need to be removed in advance:
ADF Unit/Scanner Unit/Upper Left Housing/Paper Guide Top Assy/Upper
Housing/Hinge/Rear Right FAX Housing
 Removal procedure
1. Remove the screws (x2) that secure the Right Housing.
Figure 4-29. Removing the Right Housing/Card Cover (1)
2. Release the dowel (x1) on the front side (see Fig. 4-29) and hooks (x3) on the
bottom of the Right Housing, and remove the Right Housing.
Figure 4-30. Removing the Right Housing/Card Cover (2)
3. Release the hooks (x2) from the back of the Right Housing and remove the
Card Cover.
Figure 4-31. Removing the Right Housing/Card Cover (3)
C H E C K
P O I N T
Because the parts to remove differ between models, see below for
other than Artisan 810/835/PX810FW/TX810FW/PX820FWD/
TX820FWD.
 Artisan 710/725/PX710W/TX710W/PX720WD/TX720WD:
4.3.1.7 Right Housing/Card Cover (p.187)
 Artisan 837/PX830FWD:
9.4.2.7 Right Housing/Housing Front Right (p.300)
 Artisan 730/PX730WD/TX730WD:
9.4.2.21 Right Housing / Housing Front Right (p.315)
Positioning hole & dowel
C.B.S. 3x6 (8±1Kgfcm)
C.B.P. 3x10 (6±1Kgfcm)
Right Housing
C A U T I O N
When removing the Right Housing, be careful not to let the Card
Cover interfere with the Card Slot Assy or the Card Cover may be
damaged.
Right Housing
Hook
Hook
Card Cover