Epson Artisan 810 - ADF Cover Stacker;Adf Document Support Cover

Epson Artisan 810/835/837/710/725/730/Epson Stylus Photo PX810FW/TX810FW/PX820FWD/TX820FWD/PX830FWD/PX710W/TX710W/PX720WD/TX720WD/PX730WD/TX730WD Revision G
DISASSEMBLY/ASSEMBLY Disassembly Procedures 172
Confidential
4.2.7.5 ADF Cover Stacker/ADF Document Support Cover
 Parts/Components need to be removed in advance:
ADF Unit/Scanner Unit/ADF Cover Assy/ADF Right Cover/ADF Rear Cover
 Removal procedure
1. Release the dowels (x2) that secure the ADF Cover Stacker, and remove the
ADF Cover Stacker from the ADF Base Assy.
Figure 4-138. Removing the ADF Cover Stacker
2. Release the dowels (x2) that secure the ADF Document Support Cover, and
remove the ADF Document Support Cover from the ADF Base Assy.
Figure 4-139. Removing the ADF Document Support Cover
Dowel
ADF Cover Stacker
ADF Base Assy
Protrusions of the ADF
Document Support Cover
When installing the ADF Cover Stacker, insert the protrusions (x2)
of the ADF Document Support Cover under the ADF Cover Stacker
as shown in
Fig. 4-138.
Dowel
ADF Document Support Cover
ADF Base Assy