Epson Artisan 810 - Paper Guide Top Assy

Epson Artisan 810/835/837/710/725/730/Epson Stylus Photo PX810FW/TX810FW/PX820FWD/TX820FWD/PX830FWD/PX710W/TX710W/PX720WD/TX720WD/PX730WD/TX730WD Revision G
DISASSEMBLY/ASSEMBLY Disassembly Procedures 123
Confidential
4.2.3.13 Paper Guide Top Assy
 Parts/Components need to be removed in advance:
None
 Removal procedure
1. Open the Scanner Unit.
2. Release the hooks (x2) and remove the Paper Guide Top Assy.
Figure 4-36. Removing the Paper Guide Top Assy
 When replacing the cork A/B, wipe the attaching position with
ethanol, and attach it without any gap at the point A.
 When attaching the cork B, align the cutout to the place shown
in
Fig. 4-35.
Figure 4-35. Attaching the cork
Cork A
Cork B
Cutout
Point A
Align and insert the dowels (x2) of the Paper Guide Top Assy to the
grooves of the Housing, and secure it with the hooks (x2). (See
Fig.
4-36.)
Paper Guide Top Assy
Hook
Groove & dowel of the Housing