Epson Artisan 810/835/837/710/725/730/Epson Stylus Photo PX810FW/TX810FW/PX820FWD/TX820FWD/PX830FWD/PX710W/TX710W/PX720WD/TX720WD/PX730WD/TX730WD
Revision G
Artisan 837/730/PX830FWD/PX730WD/TX730WD
Disassembly/assembly 319
Confidential
9.4.3 Routing FFC/cables
ADF/SCANNER (ARTISAN 837/PX830FWD)
Note * :See Fig. 4-196 for the connector positions on the Main Board (Artisan 837/
PX830FWD).
Figure 9-66. ADF/Scanner (Artisan 837/PX830FWD)
SCANNER (ARTISAN 730/PX730WD/TX730WD)
Note * :See Fig. 4-198 for the connector positions on the Main Board (Artisan 730/
PX730WD/TX730WD).
Figure 9-67. Scanner (Artisan 730/PX730WD/TX730WD)
No. FFC/cable name CN No.
*
Remarks
1 ADF Motor Cable CN25 ---
2 ADF Sensor Cable CN51 ---
3 Cover Open Sensor FFC CN10 ---
4 Scanner Carriage FFC CN41 Ferrite core x1
5 Scanner CR Encoder FFC CN49 ---
6 Document Cover Open Sensor Cable ---
Connect to the Relay Board
(CN2)
7 Grounding wire (x2) --- ---
Relay Board
Grounding wire from
the Scanner Unit
Grounding wire from
the ADF Unit
Scanner CR Encoder FFC
ADF Motor Cable
Scanner Carriage FFC:
Secure this on Main Board
Unit with double-sided tape.
Ferrite Core A:
Put the Scanner Carriage FFC
through this and attach it to
the Upper Housing.
ADF Sensor Cable
Double-sided tape
Document Cover
Open Sensor Cable
Cover Open Sensor FFC
No. FFC/cable name CN No.
*
Remarks
1 Scanner Cover Open Sensor FFC CN10 ---
2 Scanner Carriage FFC CN41 Ferrite core x1
3 Scanner CR Encoder FFC CN49 ---
4 Document Cover Open Sensor Cable ---
Connect to the Relay Board
(CN2)
5 Grounding wire (x1) --- ---
Scanner CR Encoder FFC
Double-sided tape
Grounding wire
Ferrite Core A:
Put the Scanner Carriage FFC
through this and attach it to
the Upper Housing.
Scanner Carriage FFC:
Secure this on Main Board
Unit with double-sided tape.
Relay Board
Document Cover
Open Sensor Cable
Cover Open Sensor FFC
To Next Page
Loading...
