Using the Control Panel 108
Printer Setting Menu
This menu allows you to configure the basic printer setting.
Language
You can select the language displayed on the LCD screen from the following list: English,
French, Italian, German, Spanish, Portuguese, Dutch, Japanese.
Test Print Menu
This menu allows you to make settings related to test print.
Nozzle check
You can print a print head nozzle check pattern for each ink cartridge. From the printing
results, you can check whether the nozzles are delivering ink properly.
& See “Checking the Print Head Nozzles” on page 137.
Status sheet
You can print the current printer status.
& See “Printing the Status Sheet” on page 112.
Network sheet
You can print the current settings of the network interface.
Printer Status Menu
This menu allows you to check the current printer status.
Version
You can check the firmware version.
Maintenance box
You can get a rough estimate of the remaining capacity of the maintenance box.
Maintenance Menu
This menu allows you to make settings related to maintenance.
To Next Page
Loading...
