Epson B-300 - Status and Error Lights

Using the Control Panel 114
*
Maintenance box status light is also on for these errors.
**
Maintenance box status light also flashes for this error.
Status and Error Lights
This section describes the meaning of lights on the control panel.
The table below describes the lights showing the printer status.
= on, = flashing
Light Description
Ink status light
(orange)
On:
The installed ink cartridge is expended.
*
The ink cartridge is not installed.
*
The installed ink cartridges cannot be used with the printer.
*
Flashing:
The installed ink cartridge is nearly expended.
**
Maintenance box
status light (orange)
On:
The installed maintenance box is at the end of its service life.
The maintenance box is not installed.
The installed maintenance box cannot be used with the printer.
The maintenance box cover is open.
The cartridge lever is in the unlocked position.
Flashing:
The maintenance box is nearing the end of its service life.
Paper status light
(orange)
On:
No paper is loaded in the paper source.
The printer loads more than one sheet of paper at a time.
Flashing:
Paper is jammed.
The duplex unit is not installed.
Power light (green)
On:
The printer is in the Ready status.
Flashing:
The printer is starting.
The printer is printing.
The printer is cleaning the print head.
The printer is charging the ink.
The printer is canceling printing.
Off:
The printer is off.