Using the Control Panel 112
Printing the Status Sheet
While in Menu mode, you can print a status sheet to see the current default values. To print
a status sheet, follow the steps below.
1. Make sure that letter/A4 size paper is loaded in the front paper cassette.
2. Press the r Right button to enter Menu mode.
3. Press the d Down or u Up button to display TEST PRINT, and then press the OK or
r Right button.
4. Press the d Down or u Up button to display STATUS SHEET, and then press the OK or
r Right button.
5. Press the OK button to start printing a status sheet.
After printing is finished, the printer returns to the Test print menu.
For B-300 Users
The control panel of the printer consists of 3 buttons and 7 lights.
To Next Page
Loading...
