110
110 | Managing Color With Profiles
You see this window:
3. Select
U.S. Prepress Defaults or North America Prepress 2 from
the
Settings menu to set Adobe RGB (1998) as the color space. Click
OK.
4. Open the photo you want to print.
If you see an Embedded Profile Mismatch message, select
Use the
embedded profile
and click OK.
If you see a Missing Profile message, select
Assign working RGB:
Adobe RGB (1998)
and click OK.
5. When your image appears, evaluate the color balance and contrast. If
they need improvement, select
Image > Mode > Assign Profile or
Edit > Assign Profile. Then select one of the following as the Profile
setting:
• A different RGB working space, such as ColorMatch RGB or
sRGB IEC61966-2.1
•
A scanner profile for your scanner
• A camera profile for your digital camera
Also click the
Preview box so you can see the effects of your profile
choice on the screen.
Note: The settings
shown are suggested
values.
To Next Page
Loading...
Need help?
General