12
12 | Introduction
OS X System Requirements
To use your printer in either a stand-alone or peer-to-peer network
environment, your Mac should meet these requirements:
• OS X 10.5.8 or higher
• PowerPC
®
G5, Intel
®
, or higher processor
• At least 2GB of RAM (4GB or more recommended)
• At least 50GB of free hard disk space for software and processing files
• Quad-speed (4×) or faster CD-ROM or DVD drive for installing the
printer software
• For USB connection: a compliant USB Hi-Speed 2.0 port and a
shielded USB “AB” cable from Series A (computer) to Series B (printer),
up to 10 feet long
• For network connection: Standard Ethernet 100Base-T/10Base-TX
Caution: Using an
improperly shielded
cable—especially a cable
more than 10 feet (3 m)
long—may cause the
printer to malfunction.
Note: USB 2.0 is
required to run the
printer at full speed.
SP4900_uguide.book Page 12 Tuesday, December 9, 2014 12:30 PM
To Next Page
Loading...
