Epson C11CA88001A1 - Adding the Network Port

31
Setting Up the Printer | 31
Adding the Network Port
After installing the printer software on your computer, you need to add the
network port. See the appropriate section below for your operating system.
Windows
1. To add the network port for Windows, see below.
• Windows 8: Navigate to the Apps or All Apps screen, click
Control Panel, click Hardware and Sound, click Devices and
Printers
, select your printer, then right-click on Printer
Properties
.
• Windows 7 and Windows Vista: Click , click View Devices
and Printers
, select your printer, then right-click on Printer
Properties
.
• Windows XP: Click Start, click Control Panel, select Printers
and Faxes
, select your printer, then right-click Properties.
2. Click the
Ports tab, then click Add Port.
SP4900_uguide.book Page 31 Tuesday, December 9, 2014 12:30 PM