69
Printing With Epson Drivers for Windows | 69
• Off (No Color Adjustment)
disables color management in the
printer driver. Choose this mode when you use a color managed
workflow in Photoshop or other software. See page 109 for
instructions.
•ICM adjusts colors based on the printer’s ICC profile, using the
Image Color Matching system. You can choose the input profile
and other settings as shown below.
In most cases, you will get better results by applying color management
in your application, rather than in the printer driver. See page 109 for
instructions.
5. Click
OK to save your settings.
Choosing Roll Paper Options
Follow the steps in this section to print on roll paper and select settings for
borderless printing and automatic cutting. (If you’re printing on cut sheets,
see page 72.)
1. On the Properties or Preferences window, make sure the
Main tab is
selected.
Tip: If you turn off color
management, you can
still control the ink
density, as described
on page 77.
Note: Many application
settings override settings
in the printer driver.
Always verify settings
to get the results
you expect.
To Next Page
Loading...
Need help?
General