51
Handling Paper and Other Media | 51
Placing the Paper in the Printer
Follow these steps to place the paper in the printer:
1. Open the roll paper cover.
2. Place the roll paper in the printer as shown. (The black end of the
spindle goes on the left.)
3. Make sure the printer is turned on, then press the button on the
control panel.
Note: To avoid feeding
excess paper, make sure
you don’t select
when you’re using roll
paper.
SP4900_uguide.book Page 51 Tuesday, December 9, 2014 12:30 PM
To Next Page
Loading...
