29
Setting Up the Printer | 29
3. Click Install.
4. When you see a screen like this one, click the
Manual button.
5. Select
LPT1: as the printer port, then click OK.
6. Follow the on-screen instructions to install all the necessary software,
place links to the User’s Guide, Network Guide, and Epson Professional
Imaging website on your desktop, and register your printer.
7. When you’re done, click
Exit and eject the CD. Restart your computer
if prompted.
SP4900_uguide.book Page 29 Tuesday, December 9, 2014 12:30 PM
To Next Page
Loading...
