Note:
You do not need to remove your continuous paper from the tractor to use the cut sheet feeder. See
“Switching between the tractor and the cut sheet feeder” on page 117 for information on switching
between the cut sheet feeder and continuous paper.
4. Hold the cut sheet feeder horizontally with both hands. Fit the notches on each side of the feeder
over the mounting posts on the printer. Lower the cut sheet feeder until it is seated securely on the
printer.
5. Plug the cable connector of the cut sheet feeder in the printer.
DLQ-3500II/DLQ-3500IIN User’s Guide
Options and Consumables 113
To Next Page
Loading...
