Note:
This feature is available only in IBM PPDS emulation mode.
Print Control Settings
Software
When you select ESC/P2 the printer operates in the Epson ESC/P mode. When you select IBMPPDS,
the printer emulates an IBM
®
printer.
Auto Tear Off
When Auto Tear Off is on and you are using continuous paper with the tractor, the printer
automatically advances the paper perforation to the tear off position, where you can easily tear off the
printed pages. When the printer receives the next print job, it automatically moves the unused paper
back to the top of form position and starts printing, so you can use all of the next page.
When Auto Tear Off is off and you are using continuous paper with the tractor, you need to move the
perforation to the tear off position manually by pressing the OK button when the screen telling
printing has finished displayed.
See “Using the tear off function” on page 42 for more information.
Auto Tear Off Wait Time
You can select the time from the point printing finished until the paper moves to the tear off position
for continuous printing. This setting is available when the auto tear off function is set to on.
Print Direction
You can select auto print direction (Auto), bidirectional printing (Bi-D), or unidirectional printing
(Uni-D). Printing is normally bidirectional for faster printing; however, unidirectional printing
allows for precise vertical printing alignment.
When print direction is set to Auto, the printer analyzes the data, and then switches automatically
whether to use Bi-D or Uni-D.
Note:
Set to Bi-D when printing from Windows to enable the printer driver's print direction setting. When
Uni-D or Auto is selected, the printer ignores the command from the Windows driver.
DLQ-3500II/DLQ-3500IIN User’s Guide
Menu Options for Settings 27
To Next Page
Loading...
