International Character Set for Italic Table
You can select among several international character sets for the Italic character table. Each character
set contains eight characters that vary depending on the country or language, so you can customize the
Italic table to suit your printing needs.
Choices are shown below.
Italic U.S.A., Italic France, Italic Germany, Italic U.K., Italic Denmark 1, Italic Sweden, Italic
Italy, Italic Spain 1
0 slash
The zero character has a slash ( ) when this feature is turned on. It has no slash (0) when this feature is
turned off. The slash allows you to easily distinguish between the uppercase letter O and a zero.
Line Spacing
Space between the lines.
Auto Line Feed
When Auto Line Feed is on, the printer accompanies each carriage return (CR) code received with a
line feed code. Set this to On if printing might continue without line feeding depending on the OS or
the applications used.
Note:
Set to Off when printing from Windows, otherwise a blank line is inserted between the lines.
Auto CR (IBM PPDS)
This setting automatically adds a line feed (LF) code to the carriage return (CR) code.
The default setting for this feature is Off. Change this to On for systems that do not have CR code
control.
Note:
This feature is available only in IBM PPDS emulation mode.
A.G.M. (IBM PPDS)
Turn on the alternate graphic mode (A.G.M.) to make the ESC 3, ESC A, ESC J, ESC K, ESC L, ESC Y,
ESC Z, and ESC commands in IBM PPDS emulation mode work the same way as in ESC/P2 mode.
DLQ-3500II/DLQ-3500IIN User’s Guide
Menu Options for Settings 26
To Next Page
Loading...
