Note:
If the auto tear off mode is turned on, the printer advances the paper perforation to the tear off
position automatically.
2. Tear off the printed pages.
!
Caution:
❏ Always tear off paper before feeding it backwards; feeding too many sheets backwards can
cause a paper jam.
❏ Never feed labels backward using the Load/Eject button, OK button, or knob on the right
side of the printer. Labels can easily peel off their backing and jam the printer. For
information on removing labels from the paper path, see “To tear off and eject labels” on
page 48.
3. Press the Load/Eject button to feed the continuous paper back to the standby position. The paper
is still attached to the tractor, but is no longer in the paper path.
4. Select Manual/CSF as the paper source on the home screen by pressing the Paper Source button.
Now you can load single sheets from the sheet guide. See “Loading Single Sheets” on page 45 for more
information.
Switching to continuous paper
Follow these steps to switch from single sheets to continuous paper:
1. If necessary, press the Load/Eject button to eject the last printed single sheet.
2. Make sure continuous paper is loaded in the printer as described in “Loading continuous paper
with the tractor” on page 38.
DLQ-3500II/DLQ-3500IIN User’s Guide
Paper Handling 52
To Next Page
Loading...
