1. Remove any paper loaded in the printer.
2. Select Replace Ribbon on the home screen.
Print head moves to the ribbon cartridge replacement position.
3. Turn the printer off.
4. Unplug the power cord from the electrical outlet; then disconnect the interface cable from the
printer. If an optional cut sheet feeder is installed, remove it.
5. Remove the sheet guide. If any options are installed, remove them and pack them in their original
boxes.
6. Make sure the print head is not hot. Then remove the ribbon cartridge as described in “Replacing
the ribbon cartridge” on page 108.
DLQ-3500II/DLQ-3500IIN User’s Guide
Product Information 140
To Next Page
Loading...
