2. Press the d button to feed paper forward, or press the u button to feed paper backward, until the
paper perforation is aligned with the tear off edge of the printer cover.
Note:
The printer has a minimum and a maximum tear off position. If you try to adjust the tear off position
beyond these limits, the printer beeps and stops moving the paper.
3. Tear off the printed pages.
4. Press the
button to exit the Micro Adjust mode.
When you resume printing, the printer automatically feeds the paper back to the top of form position
and begins printing.
DLQ-3500II/DLQ-3500IIN User’s Guide
Paper Handling 54
To Next Page
Loading...
