Epson Document scanner

You Have Trouble Adjusting the Scan Area in Thumbnail Preview
❏ Create a marquee or adjust the existing marquee to select the area you want to scan.
❏ In Home Mode or Professional Mode in EPSON Scan, click Conguration. Select the Preview tab, and then
adjust the thumbnail cropping area using the
umbnail
Cropping Area slider.
❏ Use normal preview and create marquees on the area you want to scan.
Related Information
& “Scanning in Home Mode” on page 30
& “Scanning in Professional Mode” on page 33
You Cannot Scan Multiple Images at One Time
Position originals at least 20 mm (0.8 inches) apart from each other on the scanner glass.
You Cannot Scan in Full Auto Mode
❏ If you are scanning images with a very dark or bright background, switch to another mode. Use normal preview
and create marquees on the area you want to scan.
❏ If you are scanning a large size document, switch to another mode. Use normal preview and create marquees on
the area you want to scan.
Related Information
& “Scanning in Full Auto Mode” on page 25
Scanning Takes a Long Time
❏ Try scanning your original at a lower resolution setting to speed up scanning.
❏ Computers with USB 2.0 (high speed) ports can scan faster than those with USB 1.1 ports. If you are using a
USB 2.0 port with the scanner, make sure it meets the system requirements.
Scanned Image Problems
The Edges of Your Original Are Not Scanned
❏ In Home Mode,
Oce
Mode, or Professional Mode in EPSON Scan, move the originals about 2.5 mm (0.1
inches) away from the horizontal and vertical edges of the scanner glass to avoid cropping.
❏ In Full Auto Mode or thumbnail preview in EPSON Scan, move the original 6.0 mm (0.24 inches) away from
the edges of the scanner glass.
❏ Do not use the scanner stand, and place the base of the scanner directly on a at, stable surface.
Related Information
&
“Placing Documents or Photos” on page 15
User's Guide
Solving Problems
69