Epson DS-310 - Specifications of Originals and Placing Originals; Specifications of Originals for Scanning from; The ADF; General Specifications for Originals Being Scanned

Specications of Originals and Placing
Originals
Specications
of Originals for Scanning from the ADF
is section explains the specications and conditions of originals that can be loaded in the ADF.
General Specications for Originals being Scanned
Type of Original Thickness Size
Plain paper
Fine paper
Recycled paper
Post card
Business card
Envelopes
51.8 to 128 g/m
50.8×70 mm to 100×148
mm (2×2.8 in. to 3.9×5.8 in.):
51.8 to 230 g/m
Maximum: 215.9×1,117.6 mm (8.5×44 in.)
Minimum: 50.8×70 mm (2.0×2.8 in.)
The loadable size varies depending on the type of originals.
Note:
❏ All originals must be at at the leading edge.
❏ Make sure that curls on the leading edge of the originals are kept within the following range.
A
and
B
must be 2 mm or less when
C
is equal to or more than 30 mm.
Specications
of Standard Size Originals
ese
are the
specications
for standard size originals that you can load into the ADF.
User's Guide
Specications of Originals and Placing Originals
17