!
Caution:
Be careful not to get your hands or hair caught in the mechanism when operating the roller. is could cause an
injury.
15.
Press the edge of the scanner cover rmly at the
d
mark to close it.
e
scanner exits cleaning mode.
Related Information
& “Pickup Roller Codes” on page 15
& “Separation Pad Codes” on page 16
Replacing Consumables
e pickup roller and the separation pad need to be replaced when the number of scans exceeds the life cycle of the
roller or the pad. When a replacement message is displayed on your computer, follow the steps below to replace it
and reset the scan number using Epson 2 Utility.
A: pickup roller, B: separation pad
Replacing the Pickup Roller
1. Press the
P
button to turn o the scanner.
2. Unplug the AC adapter from the scanner.
User's Guide
Maintenance
80
To Next Page
Loading...
