Epson DS-310 - Placing Long Paper in the ADF; Specifications of Long Paper

Note:
❏ You can preview the scanned image using Epson Scan 2. If you want to preview, load only the rst page of your originals
into the input tray.
e
page is ejected
aer
it is scanned and a preview image is generated. Load the ejected page again
together with the rest of the originals.
❏ If you set a batch of originals and perform previewing, the second page will be fed a little bit into the ADF. Open the
scanner cover to remove it from the ADF, and then load the page again together with the rst page and the rest of the
originals.
❏ Also if you cancel scanning in the middle of scanning a batch of originals, the next page will be fed a little bit into the
ADF and scanning stopped. You need to open the scanner cover to remove the page.
Related Information
& “Basic Scanning” on page 45
& “Advanced Scanning” on page 56
Placing Long Paper in the ADF
Specications of Long Paper
ese
are the
specications
for long paper that you can load into the scanner.
Size Thickness Paper Type Loading Capacity
Width: 50.8 to 215.9 mm
(2.0 to 8.5 in.)
Length: 368.3 to 1,117.6 mm
(14.5 to 44 in.)
51.8 to 128 g/m Plain paper
Fine paper
Recycled paper
1 sheet
User's Guide
Specications of Originals and Placing Originals
26