Epson DS-310

Note:
❏ Make sure that Epson Scan 2 is installed on your computer and the scanner is connected to your computer correctly.
❏ When Document Capture Pro (Windows) or Document Capture (Mac OS X) is installed on your computer, you can
assign the job to a button on the scanner and run the job by pressing it.
1. Place the original.
2. Make sure the feed selector on the scanner is set correctly.
To scan originals using ADF, set the feed selector to
(ADF). To scan a plastic card using the card slot, set the
feed selector to
(card).
3.
Press the
] button.
Note:
When using Document Capture Pro (Windows) or Document Capture (Mac OS X), the product starts the job that was
assigned in the Job Settings window.
Related Information
& “Specications of Originals and Placing Originals” on page 17
& “Buttons and Lights” on page 13
& “Document Capture Pro / Document Capture” on page 14
& “Scanning Using Specied Scanning Settings (Job)” on page 70
User's Guide
Basic Scanning
55