Epson DS-970 User Manual

6. Slide the edge guides to t the edge of the originals making sure there are no gaps between the originals and
the edge guides. Otherwise, the originals may be fed skewed.
Note:
❏ When scanning originals with punch holes such as loose leaf paper, load the originals with the holes facing to the side
or facing down. ere must not be any holes within a 30 mm (1.2 inches) strip at the center of the originals.
However, there can be holes within 30 mm (1.2 inches) from the leading edge of the originals. Make sure that the
edges of the punch holes do not have burrs or curls.
❏ When scanning thin paper with crinkles that are causing paper jams or double feeds, you may be able to improve the
situation by enabling Slow. To do this, select Settings > Scanner Settings > Slow on the control panel and set it to
On to slow down the feeding speed.
User's Guide
Specications of Originals and Placing Originals
30

Epson DS-970 Specifications

General

Optical Resolution	600 dpi
Maximum Scan Speed	85 ppm / 170 ipm
ADF Capacity	100 sheets
Daily Duty Cycle	9, 000 pages
Light Source	LED
Maximum Resolution	1200 dpi
Scan Speed (Color, A4, 300 dpi)	85 ppm / 170 ipm
Scan Speed (Black & White, A4, 300 dpi)	85 ppm / 170 ipm
Document Feeder Capacity	100 sheets
Maximum Document Size	215.9 x 6096 mm
Minimum Document Size	50.8 x 50.8 mm
Scanner Type	Sheetfed
Connectivity	USB 3.0
Supported Media Size	A4, A5, A6, B5
Document Size	Minimum: 50.8 x 50.8 mm; Maximum: 215.9 x 6096 mm
Operating Systems Supported	Windows, macOS
Color Depth	24-bit external