Epson DS-970 User Manual

Related Information
& “Placing Originals” on page 26
Maintenance
Cleaning the Flatbed Scanner Dock
To keep your Flatbed Scanner Dock in optimum condition, follow the steps below to clean it periodically.
c
Important:
❏ Never use alcohol, thinner, or corrosive solvent to clean the Flatbed Scanner Dock. ese chemicals can damage
the Flatbed Scanner Dock components and the case.
❏ Be careful not to spill liquid into the scanner mechanism or electronic components. is could permanently
damage the mechanism and circuitry.
❏ Do not spray lubricants onto the Flatbed Scanner Dock.
❏ Never open the Flatbed Scanner Dock case.
1. Press the button to turn o the sheet feed scanner.
Note:
ere is no power button on the atbed scanner.
2. Unplug the AC adapter, and then disconnect the USB cable that is connected to the computer from the Flatbed
Scanner Dock.
3. Wipe
o
any dirt on the outer case with a
so
cloth.
If the case is very dirty, dampen a so cloth with water and wring it out thoroughly, and then wipe o any
remaining stains. Next, use a so dry cloth to wipe the case.
User's Guide
Using the Flatbed Scanner Dock
98

Epson DS-970 Specifications

General

Optical Resolution	600 dpi
Maximum Scan Speed	85 ppm / 170 ipm
ADF Capacity	100 sheets
Daily Duty Cycle	9, 000 pages
Light Source	LED
Maximum Resolution	1200 dpi
Scan Speed (Color, A4, 300 dpi)	85 ppm / 170 ipm
Scan Speed (Black & White, A4, 300 dpi)	85 ppm / 170 ipm
Document Feeder Capacity	100 sheets
Maximum Document Size	215.9 x 6096 mm
Minimum Document Size	50.8 x 50.8 mm
Scanner Type	Sheetfed
Connectivity	USB 3.0
Supported Media Size	A4, A5, A6, B5
Document Size	Minimum: 50.8 x 50.8 mm; Maximum: 215.9 x 6096 mm
Operating Systems Supported	Windows, macOS
Color Depth	24-bit external