Epson DS-970 User Manual

3. Load the laminated cards into the input tray facing down with the top edge facing into the ADF.
Slide the laminated cards into the ADF until they meet resistance.
4. Slide the edge guides to
t
the edge of the laminated cards.
Note:
To scan laminated cards, set the appropriate setting in the Epson Scan 2 window. When you are using Document
Capture Pro, you can open the window by pressing the Detailed Settings button on the Scan Settings screen.
❏ To increase the accuracy of auto size detection, select the Main Settings tab > Document Size > Settings > Scan
laminated card. See the Epson Scan 2 help for details.
❏ Select the Main Settings tab > Detect Double Feed > O. See the Epson Scan 2 help for details.
If Detect Double Feed is enabled in the Epson Scan 2 window and a double feed error occurs, remove the card from
the ADF, reload it, press the
d button, and then select DFDS Function (Double Feed Detection Skip function) on
the control panel to set it to On. is disables Detect Double Feed for the next scan, and you can scan again. e
DFDS Function only disables Detect Double Feed for one sheet.
User's Guide
Specications of Originals and Placing Originals
38

Epson DS-970 Specifications

General

Optical Resolution	600 dpi
Maximum Scan Speed	85 ppm / 170 ipm
ADF Capacity	100 sheets
Daily Duty Cycle	9, 000 pages
Light Source	LED
Maximum Resolution	1200 dpi
Scan Speed (Color, A4, 300 dpi)	85 ppm / 170 ipm
Scan Speed (Black & White, A4, 300 dpi)	85 ppm / 170 ipm
Document Feeder Capacity	100 sheets
Maximum Document Size	215.9 x 6096 mm
Minimum Document Size	50.8 x 50.8 mm
Scanner Type	Sheetfed
Connectivity	USB 3.0
Supported Media Size	A4, A5, A6, B5
Document Size	Minimum: 50.8 x 50.8 mm; Maximum: 215.9 x 6096 mm
Operating Systems Supported	Windows, macOS
Color Depth	24-bit external