Epson DS-970 User Manual

3. Load the originals at the center of the input tray in descending order of paper size with the widest at the back
and the narrowest at the front.
c
Important:
Check the following points when setting dierent sizes of originals.
❏ Slide the originals with their leading edges aligned, until they meet resistance in the ADF.
❏ Set the originals at the center of the input tray. Refer to the
u mark on the scanner as your guide.
❏ Set the originals straight.
If not, originals may be fed askew or jammed.
Note:
Load the originals into the input tray facing down and slightly displace the top edges at an angle facing into the ADF.
4. Slide the edge guides to
t
the edges of the widest original.
User's Guide
Specications of Originals and Placing Originals
52

Epson DS-970 Specifications

General

Optical Resolution	600 dpi
Maximum Scan Speed	85 ppm / 170 ipm
ADF Capacity	100 sheets
Daily Duty Cycle	9, 000 pages
Light Source	LED
Maximum Resolution	1200 dpi
Scan Speed (Color, A4, 300 dpi)	85 ppm / 170 ipm
Scan Speed (Black & White, A4, 300 dpi)	85 ppm / 170 ipm
Document Feeder Capacity	100 sheets
Maximum Document Size	215.9 x 6096 mm
Minimum Document Size	50.8 x 50.8 mm
Scanner Type	Sheetfed
Connectivity	USB 3.0
Supported Media Size	A4, A5, A6, B5
Document Size	Minimum: 50.8 x 50.8 mm; Maximum: 215.9 x 6096 mm
Operating Systems Supported	Windows, macOS
Color Depth	24-bit external