Installation Guide
16
Specifications
Setting plate
Item Specification Remark Reference
Page
Setting plate weight Approx. 7.9 kg Setting plate, 3-axis adjustment unit, slide
plate, wall plate, wall plate covers/end
caps
Maximum load capacity 13.0 kg
Forward/backward slide ad-
justment range
0 to 320 mm Adjustment for 3-axis adjustment unit in-
stallation position: 87 mm
See the fig-
ure below
Vertical slide adjustment range ±38 mm See the fig-
ure below
Horizontal roll adjustment
range
±3° Fine adjustments possible with adjust-
ment dial
s p.46
Horizontal rotation adjustment
range
±8° Fine adjustments possible with adjust-
ment dial
s p.46
Vertical tilt adjustment range ±3° Fine adjustments possible with adjust-
ment dial
s p.46
Horizontal slide adjustment
range
±45 mm See the fig-
ure below
Wall plate cover
The following dimensions apply when attaching the wall plate cover.
[Unit: mm]
505.7
255.7
277.1
When installing the wall plate cover, you need a space of approximately 263 mm from the center of the wall
plate to the left side, and approximately 253 mm to the right side.
To Next Page
Loading...
