Epson EB-1470Ui - Installing the Pen Stand

Installation Guide
63
c
Connect the cable that is connected to the projector to the Control Pad
For details on connecting cables, see the following.
s "Necessary cables when installing the Control Pad" p.35
d
Paste the port protection stickers supplied to the plugs on the Control Pad that are not
being used
s "Control Pad" p.14
e
Attach the front cover
Installing the Pen Stand
See the following for the installation location of the Pen Stand.
s "When installing the Control Pad and the Pen Stand" p.28
a
Remove the front cover