Installation Guide
28
When installing the Control Pad and the Pen Stand
When installing the Control Pad, leave enough space around it to install/remove the cover or to connect/
disconnect cables easily as shown in the following figure.
[Unit: mm]
㻝㻜㻜
㻝㻜㻜
When installing the Pen Stand next to the Control Pad, do not install it so that it covers the groove in the front
cover as shown in the following figure.
c
When installing the Touch Unit, do not install the Control Pad on the projection screen and the
surrouding area (shaded area in the following figure). Otherwise The Touch Unit will not operate
correctly.
[Unit: mm]
To Next Page
Loading...
