Epson EB-1470Ui

To Next Page

To Previous Page

Using the Product Safely

It also describes how to install the Touch Unit, Control Pad, and Pen Stand after mounting the projector on

a wall.

Main Page

Using the Product Safely2
Safety Instructions2
Safety Indications2
Explanation of Symbols2
Safety Precautions for Installation2
Notes on Handling the Touch Unit5
About this Installation Guide5
Choosing an Installation Location7
Projector Installation Location7
Touch Unit Installation Location8
Table of Contents10
Installation Guide12
Installation Work Flow12
Installing One Projector12
When Two or more Projectors Are Installed in Parallel13
Package Contents14
Setting Plate14
Control Pad15
Touch Unit16
Touch Unit Bracket16
Specifications17
Setting Plate17
Wall Plate Cover17
Wall Plate18
Vertical Slide Adjustment Range18
Horizontal Slide Adjustment Range19
Forward/Backward Slide Adjustment Range19
Position for Installing Accessories19
Control Pad/Pen Stand20
Control Pad (External Dimensions/Weight)20
Cable Routing Holes21
Pen Stand (External Dimensions/Weight)21
Touch Unit22
Touch Unit (External Dimensions/Weight)22
Touch Unit Bracket (External Dimensions/Adjustment Range/Weight)22
Attached Labels23
Laser Diffusion Port24
Projection Distance Table25
Figures of Installation Dimensions25
When Installing the Touch Unit26
When Installing the Control Pad and the Pen Stand29
When Projected Image Is Smaller than 85 Inches30
16:10 Projected Image31
When Projected Image Is 85 Inches or more32
16:10 Projected Image33
Installing the Setting Plate34
Connecting Devices34
Necessary Cables34
Installation Procedure37
Assemble the Parts37
Install the Wall Plate on the Wall39
Determine the Projection Distance, and then Pass the Cables through the Setting Plate41
Attaching the Setting Plate to the Wall Plate43
Securing the Projector to the Setting Plate45
Adjusting the Position of the Projector47
Sticking the Infrared Deflectors53
Arc Correction55
Calibrating the Pen56
Attaching the Covers60
Stand63
Installing the Control Pad63
Installing the Pen Stand64
Installing the Touch Unit66
When Installing the Touch Unit Outside the Whiteboard (Using the Touch Unit Bracket)66
Installation Procedure66
Angle Adjustment72
Touch Calibration86
When Installing the Touch Unit on the Whiteboard (Without Using the Touch Unit Bracket)89
Installation Procedure89
Angle Adjustment93
Appendix97
Installing Multiple Projectors in Parallel (Multi-Projection)97
Multi-Projection Settings97
Setting the Projector ID97
Adjusting the Image in Multi-Projection100
When Two Projectors Are Installed in Parallel and You Are Using the Interactive Function101
Setting the Projectors in Sync101
Setting Multi-Projection Interactive103
Batch Setup Function110
Setup Using a USB Flash Drive111
Saving Settings to the USB Flash Drive111
Copying Saved Settings to Other Projectors113
When Setup Fails113
Attaching a Security Cable115

Epson EB-1470Ui - Page 6

Table of Contents

Other manuals for Epson EB-1470Ui

Related product manuals