28
6. Adjusting the Projection Screen
To ensure maximum projection screen quality, follow the steps below to adjust the projection screen.
a Turn on the projector
b Change the aspect ratio
Each time you press the [Aspect] button on the remote control, the aspect name is displayed
on the screen and the aspect ratio changes.
Change the setting according to the signal for the connected equipment.
Alternatively, set the aspect ratio in [Signal] - [Aspect] from the Configuration menu.
s Projector's User's Guide "Configuration Menu"
Do not make adjustments with the Keystone function of the projector. Doing so may
result in a reduction in image quality.
Using the Remote Control Using the Control Panel
Remote Control
To Next Page
Loading...
Need help?
General
