19
Quick Start
A
Insert the disc into its slot by facing the
disc label upward.
If you are using a dual-side disc, face the side you
wish to play downwards.
Insert an 8-cm disc into the disc slot center
position.
A short beep sounds and the power comes on.
Inserting the disc makes the Disc indicator light up
green.
B
Start playback.
The projection lamp lights up automatically, and
projection begins. It takes approximately 30
seconds from when the lamp lights up until the
image is projected brightly.
Disc Playback
Do not use discs with any CD/DVD label stickers stuck to
them, and do not use discs that have condensation on
them. This may cause malfunction or damage.
When the Menu appears:
s
p. 26
sp. 27
sp. 29
When using this unit at high altitudes, that is 1500
m or more above sea level, set “High Altitude
Mode” to “On”.
sp. 63
Caution
Never look at the lens after you have turned the unit power
switch to On.
Close the lens cover before inserting or ejecting a disc.
Playing a disc and projecting
To Next Page
Loading...
Need help?
General
