21
Quick Start
If the unit is tilted by up to 30° degrees in an upward or downward orientation, you can correct the image shape.
However, it will be difficult to focus if the tilt angle is large.
Correcting keystone
distortion of the image
(Keystone)
• Adjusting the height of your image
This unit automatically detects vertical tilt and
corrects the images that are keystone distorted. If
the projected image is still distorted, you can
adjust it from the Visual Setup Menu or using the
remote control. sp. 61
To project the image higher, press the foot levers
and adjust the height.
• Correcting the distorted images
Tern the feet to adjust the horizontal tilt angle.
Be sure to push in the front feet by pushing the foot
levers when carrying the projector.
Adjust the front feet by pressing the foot levers. You
can tilt the projector up to 10°.
Adjust the feet in such a way that the unit is level.
When the top of the image is wide When the bottom of the image is wide
I
you exten
t
e
oot an
t
t t
e un
t, t
e
mage w
ave
eystone
stort
on.
Reshape the keystone distortion as follows:
To Next Page
Loading...
Need help?
General
