47
Advanced Operations
You can attach a USB memory or multicard reader that conform to the USB 1.1 to the unit and play the following format
files.
• MP3/WMA files
• JPEG files
• DivX
®
files
The file playback and your operations during play are the same as when you play files of a using the standard
DVD player.
Playback by attaching a peripheral
device
• When you connect a USB storage device to the unit, the source is changed to the USB and playback starts
automatically when:
- a disc is being played or stopped on the standard DVD player.
- another video device, a TV set or a computer is connected to the unit and a disc is being played or stopped.
• If you use a USB hub, the unit will not operate normally. Connect the USB storage device directly to the unit.
• When power to the unit is turned on with only a USB storage connected (no disc inserted in the disc slot), the USB storage is not
recognized and “No Disc” is displayed. Even if you press , it does not playback. In such a case, remove the USB storage and
then reconnect.
• Do not remove the USB storage during a Slideshow. Stop the Slideshow by pressing , and remove the USB storage.
Connecting a USB storage device
To Next Page
Loading...
Need help?
General
