EasyManuals Logo

Epson EB-X20 User Manual

Epson EB-X20
146 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #110 background imageLoading...
Page #110 background image
Moving images are not displayed
Check Remedy
Is the computer's image signal being output to the LCD and the
monitor?
(Only when projecting images from a laptop computer or a
computer with a built-in LCD screen)
Change the image signal from the computer to external output only. Check your computer's documentation, or contact
the computer's manufacturer.
Are the contents of the moving image you are trying to project
copyright protected?
The projector may not be able to project copyright protected moving images that are being played back on a computer.
For more details, see the user's guide supplied with the player and so on.
Projection stops automatically
Check Remedy
Are Sleep Mode, Lens Cover Timer, or A/V Mute Timer set to
On?
If any of these are set to On, the power turns off automatically in the following situations.
When Sleep Mode is set to On: If no operations are performed for a specified length of time while no image signal is
being input.
When Lens Cover Timer is set to On: If approximately 30 minutes has passed since the lens cover was closed.
When A/V Mute Timer is set to On: If approximately 30 minutes has passed since the A/V mute was enabled.
To prevent the projector from switching off automatically, make sure each setting is set to Off.
s "ECO Menu" p.99
Is the computer in power-saving mode? If the computer is in power-saving mode and no operations are performed for a specified period of time, the image may
disappear. Perform an operation on the computer to display the image again.
The message "Not supported" is displayed
Check Remedy
Is the image signal format setting correct?
(Only when projecting images from a video source)
Change the setting according to the signal for the connected equipment.
s Signal - Video Signal p.86
Do the image signal resolution and the refresh rate correspond to the
mode?
(Only when projecting computer images)
Refer to the computer's documentation for how to change the image signal resolution and the refresh rate output from
the computer.
s "Supported Monitor Displays" p.133
Problem Solving
110

Table of Contents

Other manuals for Epson EB-X20

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson EB-X20 and is the answer not in the manual?

Epson EB-X20 Specifications

General IconGeneral
Projection System3LCD Technology
LCD Panel0.55 inch with MLA (D8)
Color Light Output2, 700 lumen - 1, 890 lumen (economy)
White Light Output2, 700 lumen - 1, 890 lumen (economy)
ResolutionXGA, 1024 x 768, 4:3
Contrast Ratio10, 000:1
LampETORL, 200 W, 5, 000 h durability, 6, 000 h durability (economy mode)
Keystone CorrectionAuto vertical: ± 30°, Manual horizontal ± 30°
Projection Ratio1.48 - 1.77:1
ZoomManual, Factor: 1.2
Projection Size30 inches - 300 inches
Projection Distance Wide/Tele1.8 m - 2.17 m (60 inch screen)
Projection Lens F Number1.58 - 1.72
Focal Distance16.9 mm - 20.28 mm
FocusManual
Offset8:1
USB Display Function3 in 1: Image / Mouse / Sound
InterfacesUSB 2.0 Type B, RS-232C, Ethernet interface (100 Base-TX / 10 Base-T), VGA in (2x), VGA out, HDMI in, Composite in, Component in (2x), S-Video in, RGB in (2x), Stereo mini jack audio out, Stereo mini jack audio in (2x), Cinch audio in
Energy Use270 W, 223 W (economy), 0.47 W (standby)
Dimensions Single Carton363 x 397 x 160 mm
Carton Weight4.12 Kg

Related product manuals