Combining Scaled Images
A section of the image is cropped and displayed. This allows you to create
one large image by combining images projected from multiple projectors.
a
Project the image, and then press the [Menu] button.
s "Using the Configuration Menu" p.114
b
Select Multi-Projection from Extended.
a
You can also perform the same operation from Scale in
Signal.
c
Select Scale, and then press the [ ] button.
d
Set Scale to On.
(1)
Select Scale, and then press the [
] button.
(2)
Select On, and then press the [
] button.
(3) Press the [Esc] button to return to the previous screen.
e
Set Scale Mode.
(1)
Select Scale Mode, and then press the [
] button.
(2)
Select Zoom Display or Full Display, and then press the [
] button.
Zoom Display: Adjusts according to the image currently displayed.
(2) Full Display: Adjusts according to the projector's panel size (the
maximum area in which an image can be displayed).
(3) Press the [Esc] button to return to the previous screen.
Multi-Projection Function
89
To Next Page
Loading...
