Setting the projector ID
Procedure
A
During projection, press the [Menu] button and select
Extended - "Multi-Projection" from the configuration menu.
s
"Using the Configuration Menu" p.47
Remote Control
B
Select "Projector ID", and then press the [Enter] button.
C
Select of one of the numbers from 1 to 9 to use as the ID and
then press the [Enter] button.
D
Press the [Menu] button to close the configuration menu.
Checking the Projector ID
Use the following procedure to check the projector ID.
Procedure
A
Set the remote control ID switch to On.
Settings for Multiple Projectors
151
To Next Page
Loading...
