Administrator Settings Menu
Sub Menu Function
Administrator Password
This is the password for the Administrator settings menu of network settings.
You can enter up to 16 single-byte alphanumeric characters.
If the administrator password is not set, click OK with an empty password box.
Network Host Name
You can enter up to 15 single-byte alphanumeric characters.
PJLink Password
Set a password to use when you access the projector using compatible PJLink software.
s
p.117
You can enter up to 32 single-byte alphanumeric characters.
Web Control Password
Set a password to use when making settings and controlling the projector using Web Control. You can enter up to 8 single-byte alphanumeric characters.
Web Control is a computer function that allows you to set up and control the projector by using the Web browser on a computer connected on a
network. s p.109
Monitor Password
You can enter up to 16 single-byte alphanumeric characters.
Secure HTTP
Apply security (HTTPS) to Web Control. To set security by Web control, it is recommended to set it On.
Mail Notification
Goes to the Mail Notification setting menu. s p.73
Manage Certificates
Goes to the Manage Certificates settings menu. s p.74
SNMP
Goes to the SNMP settings menu. s p.75
Priority Gateway
For the priority gateway, select either Wired or Wireless.
AMX Device Discovery
When the projector is connected to a network, set this to On to allow the projector to be detected by
AMX Device Discovery
g
. Set this to Off if you are
not connected to an environment controlled with a controller from AMX or AMX Device Discovery.
Network Menu
71
To Next Page
Loading...
Need help?
General
