Configuration Menu
48
Function Menu/Settings Explanation
Lock Setting
Child Lock On, Off This locks the standby button on the projector's
control panel to prevent children from turning
on the projector by accident. You can turn on the
power when locked by holding down the stand-
by button for approximately three seconds. You
can still turn off the device using the standby
button or perform operations with the remote
control as usual.
If changed, this setting is enabled after you pow-
er off the projector and the cool-down process is
complete.
Note that even if Child Lock is set to On, the pro-
jector still turns on when the power cord is con-
nected if Direct Power On is set to On.
Control Panel Lock Full Lock, Partial
Lock, Off
Full Lock: Disables all of the projector's buttons.
Partial Lock: Disables all of the projector's but-
tons except for the standby button.
is displayed on the screen if buttons are
pressed while the projector is locked. To unlock,
press and hold the standby button on the control
panel for at least 7 seconds.
If changed, this setting is enabled once you close
the Configuration menu.
Memory
Load Memory Memory1 to Memo-
ry10
Loads the settings saved in Save Memory to ad-
just the image.
Save Memory Memory1 to Memo-
ry10
Saves the settings made in Image to a memory.
Erase Memory Memory1 to Memo-
ry10
Erases a saved memory.
Rename Memory Memory1 to Memo-
ry10, Default, DVD,
VCR, SDTV, HDTV,
Cinema, Sports, Mu-
sic, Anime, Game,
Custom
Changes the saved memory name.
Reset
Yes, No
Resets all Settings except for Audio Out De‐
vice, Power On Link, Power Off Link, and Mem‐
ory.